Hjælp
Læs mere
Medlemsfordele: Gratis fragt / Spar op til 90%
Hurtig levering
Fremragende Trustpilot
Log ind
Søg
Hjem
Kategorier
Bestsellers
Brugte bøger
Kommer snart
Outlet
Nyheder
Gaveguide
Blog
Læs mere
FAQ
Konto
Kontakt
Plusbog logo
0
0 kr
0
Gemte
Log ind
Bøger
Bestsellers
Kommer snart
Nyheder
Outlet
Brugte bøger
Spil og hobby
Gavekort
Bogblog
Fri streaming
Op til 20% Rabat på nye medlemsordrer
Kurv
  1. Bog
  2. Opslagsværker og leksika
  3. Opslagsværker
Manufacturing Processes Reference Guide
Af: Dell K. Allen, Robert H. Todd, Leo Alting Engelsk Hardback
Manufacturing Processes Reference Guide Dell K. Allen, Robert H. Todd, Leo Alting 9780831130497
SPAR
kr 138
Manufacturing Processes Reference Guide
Af: Dell K. Allen, Robert H. Todd, Leo Alting Engelsk Hardback
  • Breaks down the treatment of each process into three categories: Knowledge, Application, and Development and organizes each process family based on common characteristics.  
  • Comprehensively illustrates, defines, and explains each process to provide the reader with an unequaled understanding of the process and its applications.
  • Encourages an appreciation of the integration of design and manufacturing engineering activities that results in more practical, less expensive, and better designed products for the consumer.

This item replaces 978-0-8311-3049-7. It is now a paperback/print-on-demand edition.  

Written by a team of educators with unmatched experience, in collaboration with a consortium of industrial representatives from Black and Decker, Boeing, Caterpillar, General Motors, Grumman, Tektronix, Texas Instruments, Westinghouse, and Xerox, Manufacturing Processes Reference Guide provides thorough descriptions of over 125 of the most important processes available to industry today. This important resource encompasses the entire spectrum of manufacturing, from "Abrasive Jet Machining" to "Wire Drawing." Used with Fundamental Principles of Manufacturing Processes, the two books provide all the information needed to identify the ideal process for a specific manufacturing requirement.

"Todd, Allen, and Alting's book is intended to help integrate design and manufacturing engineering activities by providing students of engineering and designers in industry with easily accessible information about common manufacturing processes. The authors rightfully believe that the first step in designing a component is for the designer to become familiar with the processes that will be used in its manufacture. This always leads to more practical, less expensive, and better designed products. [Recommended for] upper-division undergraduate through professional."

SCIENCE AND TECHNOLOGY Magazine.

TAXONOMY OF MANUFACTURING PROCESSES

MANUFACTURING PROCESSES

MECHANICAL REDUCTION


Abrasive Jet Machining Arbor Milling Band Filing Band Sawing Broaching Centerless Grinding Circular Sawing Conventional Blanking Cylindrical Grinding Die Threading Drilling End Milling Fine Blanking Gear Hobbing Gear Milling Gear Shaping Honing Horizontal Boring Internal Grinding Jig Boring Lancing Lapping Lathe Boring Nibbling Notching Parting/Grooving Perforating Precision Boring Punching Reaming Reciprocating Filing Reciprocating Sawing Routing Sand Blasting Shaping/Planing Shearing Slitting Steel-Rule-Die Blanking Superfinishing Surface Grinding Tapping Thread Cutting Thread Milling Turning/Facing Vertical Boring Vibratory Finishing

THERMAL REDUCING


Cavity Type Electrical Discharge Machining (EDM) EDM Grinding Electrical Discharge Machining Wire Cutting (Wire EDM) Gas/Flame Cutting Plasma Arc Cutting

CHEMICAL REDUCING


ECM Grinding (ECG) Electrochemical Machining (Cavity Type ECM) Immersion Chemical Milling/Blanking Photo Etching

CONSOLIDATION


Axial Powder Compaction Blow Molding Cold Chamber Die Casting Compression Molding Cored Sand Casting Extrusion Molding Filament Winding Green Sand Casting Injection Molding Investment Casting Isostatic Powder Compaction No-Bake Sand Casting Permanent Mold Casting Plaster Mold Casting Rotational Molding Shell Mold Casting Thermoform Molding Transfer Molding

DEFORMATION


Brake Forming Cold Heading Deep Drawing Drop Forging Impact Extrusion Plate Roll Bending Progressive Die Drawing Progressive Roll Forming Stretch Draw Forming Swaging Thread Rolling Tube Bending Tube Drawing Upset Forging Wire Drawing

THERMAL JOINING


Electron Beam Welding Furnace Brazing Gas Metal Arc Welding (MIG) Gas Torch Braze Welding Gas Tungsten Arc Welding (TIG) Laser Beam Welding Metal Bath Dip Soldering Plasma Arc Welding Projection Welding Shielded Metal Arc Welding Spot Welding Submerged Arc Welding Wave Soldering

CHEMICAL JOINING


Adhesive Bonding

ANNEALING

Annealing Stress Reliving Tempering

HARDENING


Age Hardening Carbonitriding Carburizing Induction Hardening Quench Hardening

SURFACE PREPARATION


Chemical Degreasing Chromate Conversion Phosphate Conversion Solvent Degreasing Ultrasonic Cleaning Vapor Degreasing

SURFACE COATING


Air Gun Spraying Electroplating Electrostatic Coating Hot Dip Coating Ion Plating Sputtering Vacuum Metallizing

SURFACE MODIFICATION


Barrel Tumbling

INDEX


REFERENCES

Vis mere
Eksklusiv medlemspris 706 kr
Medlemspris 720 kr
Eksklusiv medlemspris og medlemspris er kun for medlemmer. Du bliver automatisk medlem når du køber til eksklusiv medlemspris eller medlemspris. Få 7 dages gratis medlemskab (herefter automatisk 89 kr/30 dage). Læs mere om fordelene
Gratis fragt
23 - 25 hverdage
10 kr
Lavt pakkegebyr
Normalpris 844 kr
Fragt: 59 kr
23 - 25 hverdage
20 kr
Pakkegebyr
Spar 138 kr
Se vores konkurrenters priser her
God 15.826 anmeldelser på
  • Breaks down the treatment of each process into three categories: Knowledge, Application, and Development and organizes each process family based on common characteristics.  
  • Comprehensively illustrates, defines, and explains each process to provide the reader with an unequaled understanding of the process and its applications.
  • Encourages an appreciation of the integration of design and manufacturing engineering activities that results in more practical, less expensive, and better designed products for the consumer.

This item replaces 978-0-8311-3049-7. It is now a paperback/print-on-demand edition.  

Written by a team of educators with unmatched experience, in collaboration with a consortium of industrial representatives from Black and Decker, Boeing, Caterpillar, General Motors, Grumman, Tektronix, Texas Instruments, Westinghouse, and Xerox, Manufacturing Processes Reference Guide provides thorough descriptions of over 125 of the most important processes available to industry today. This important resource encompasses the entire spectrum of manufacturing, from "Abrasive Jet Machining" to "Wire Drawing." Used with Fundamental Principles of Manufacturing Processes, the two books provide all the information needed to identify the ideal process for a specific manufacturing requirement.

"Todd, Allen, and Alting's book is intended to help integrate design and manufacturing engineering activities by providing students of engineering and designers in industry with easily accessible information about common manufacturing processes. The authors rightfully believe that the first step in designing a component is for the designer to become familiar with the processes that will be used in its manufacture. This always leads to more practical, less expensive, and better designed products. [Recommended for] upper-division undergraduate through professional."

SCIENCE AND TECHNOLOGY Magazine.

TAXONOMY OF MANUFACTURING PROCESSES

MANUFACTURING PROCESSES

MECHANICAL REDUCTION


Abrasive Jet Machining Arbor Milling Band Filing Band Sawing Broaching Centerless Grinding Circular Sawing Conventional Blanking Cylindrical Grinding Die Threading Drilling End Milling Fine Blanking Gear Hobbing Gear Milling Gear Shaping Honing Horizontal Boring Internal Grinding Jig Boring Lancing Lapping Lathe Boring Nibbling Notching Parting/Grooving Perforating Precision Boring Punching Reaming Reciprocating Filing Reciprocating Sawing Routing Sand Blasting Shaping/Planing Shearing Slitting Steel-Rule-Die Blanking Superfinishing Surface Grinding Tapping Thread Cutting Thread Milling Turning/Facing Vertical Boring Vibratory Finishing

THERMAL REDUCING


Cavity Type Electrical Discharge Machining (EDM) EDM Grinding Electrical Discharge Machining Wire Cutting (Wire EDM) Gas/Flame Cutting Plasma Arc Cutting

CHEMICAL REDUCING


ECM Grinding (ECG) Electrochemical Machining (Cavity Type ECM) Immersion Chemical Milling/Blanking Photo Etching

CONSOLIDATION


Axial Powder Compaction Blow Molding Cold Chamber Die Casting Compression Molding Cored Sand Casting Extrusion Molding Filament Winding Green Sand Casting Injection Molding Investment Casting Isostatic Powder Compaction No-Bake Sand Casting Permanent Mold Casting Plaster Mold Casting Rotational Molding Shell Mold Casting Thermoform Molding Transfer Molding

DEFORMATION


Brake Forming Cold Heading Deep Drawing Drop Forging Impact Extrusion Plate Roll Bending Progressive Die Drawing Progressive Roll Forming Stretch Draw Forming Swaging Thread Rolling Tube Bending Tube Drawing Upset Forging Wire Drawing

THERMAL JOINING


Electron Beam Welding Furnace Brazing Gas Metal Arc Welding (MIG) Gas Torch Braze Welding Gas Tungsten Arc Welding (TIG) Laser Beam Welding Metal Bath Dip Soldering Plasma Arc Welding Projection Welding Shielded Metal Arc Welding Spot Welding Submerged Arc Welding Wave Soldering

CHEMICAL JOINING


Adhesive Bonding

ANNEALING

Annealing Stress Reliving Tempering

HARDENING


Age Hardening Carbonitriding Carburizing Induction Hardening Quench Hardening

SURFACE PREPARATION


Chemical Degreasing Chromate Conversion Phosphate Conversion Solvent Degreasing Ultrasonic Cleaning Vapor Degreasing

SURFACE COATING


Air Gun Spraying Electroplating Electrostatic Coating Hot Dip Coating Ion Plating Sputtering Vacuum Metallizing

SURFACE MODIFICATION


Barrel Tumbling

INDEX


REFERENCES

Vis mere
Se mere i:
Produktdetaljer
Sprog: Engelsk
Sider: 486
ISBN-13: 9780831130497
Indbinding: Hardback
Udgave:
ISBN-10: 0831130490
Kategori: Opslagsværker
Udg. Dato: 1 nov 1993
Længde: 0mm
Bredde: 267mm
Højde: 0mm
Oplagsdato: 1 nov 1993
Forfatter(e): Dell K. Allen, Robert H. Todd, Leo Alting
Forfatter(e) Dell K. Allen, Robert H. Todd, Leo Alting

Kategori Opslagsværker

Sprog Engelsk

Indbinding Hardback

Sider 486

Udgave

Længde 0mm

Bredde 267mm

Højde 0mm

MEDLEMSFORDELE
GRATIS FRAGT
SPAR OP TIL 90%
Andre har også købt
Rob Thompson Manufacturing Processes for Design Professionals
BOG (HARDBACK)
Manufacturing Processes for Design Professionals
Rob Thompson
Eksklusiv medlemspris kr 468
kr 717
Normalpris
kr 493
Medlemspris
SPAR
kr 249
Cecilia Pereira, Justin M. Boucher, Thomas Roiss, Konrad Hungerbuhler, Martin Scheringer Chemical Products and Processes
BOG (PAPERBACK)
Chemical Products and Processes
Cecilia Pereira, Justin M. Boucher, Thomas Roiss, Konrad Hungerbuhler, Martin Scheringer
Eksklusiv medlemspris kr 483
kr 619
Normalpris
kr 497
Medlemspris
SPAR
kr 136
Chris Lefteri Materials for Design
BOG (PAPERBACK)
Materials for Design
Chris Lefteri
Eksklusiv medlemspris kr 210
kr 276
Normalpris
kr 217
Medlemspris
SPAR
kr 66
Ajit Behera Advanced Materials
BOG (PAPERBACK)
Advanced Materials
Ajit Behera
Eksklusiv medlemspris kr 525
kr 675
Normalpris
kr 540
Medlemspris
SPAR
kr 150
Wucius Wong, W Wong Principles of Form and Design
BOG (PAPERBACK)
Principles of Form and Design
Wucius Wong, W Wong
Eksklusiv medlemspris kr 446
kr 529
Normalpris
kr 454
Medlemspris
SPAR
kr 83
. Jester Twentieth–Century Building Materials – History and Conservation
BOG (PAPERBACK)
Twentieth–Century Building Materials – History and Conservation
. Jester
Eksklusiv medlemspris kr 472
kr 540
Normalpris
kr 479
Medlemspris
SPAR
kr 68
Francesca Prina Architecture
BOG (PAPERBACK)
Architecture
Francesca Prina
Eksklusiv medlemspris kr 254
kr 309
Normalpris
kr 260
Medlemspris
SPAR
kr 55
John Fernandez Material Architecture
BOG (PAPERBACK)
Material Architecture
John Fernandez
Eksklusiv medlemspris kr 531
kr 619
Normalpris
kr 540
Medlemspris
SPAR
kr 88
Editors of "Fine Woodworking", Fine Woodworkin Joinery
BOG (PAPERBACK)
Joinery
Editors of "Fine Woodworking", Fine Woodworkin
Eksklusiv medlemspris kr 191
kr 242
Normalpris
kr 196
Medlemspris
SPAR
kr 51
Rafiq I. Noorani, Rafiq Noorani 3D Printing
BOG (HARDBACK)
3D Printing
Rafiq I. Noorani, Rafiq Noorani
Eksklusiv medlemspris kr 969
kr 1.183
Normalpris
kr 990
Medlemspris
SPAR
kr 214
Textiles and Fashion
BOG (PAPERBACK)
Textiles and Fashion
Eksklusiv medlemspris kr 468
kr 573
Normalpris
kr 479
Medlemspris
SPAR
kr 105
Terrie Noll The Joint Book
BOG (SPIRALRYG)
The Joint Book
Terrie Noll
Eksklusiv medlemspris kr 135
kr 146
Normalpris
kr 136
Medlemspris
SPAR
kr 11
Stefanella Sposito, Gianni Pucci Fabrics in Fashion Design: The Complete Textile Guide. Third Updated and Enlarged Edition
BOG (HARDBACK)
Fabrics in Fashion Design: The Complete Textile Guide. Third Updated and Enlarged Edition
Stefanella Sposito, Gianni Pucci
Eksklusiv medlemspris kr 260
kr 360
Normalpris
kr 270
Medlemspris
SPAR
kr 100
Albert Jackson, David Day The Complete Manual of Woodworking
BOG (PAPERBACK)
The Complete Manual of Woodworking
Albert Jackson, David Day
Eksklusiv medlemspris kr 425
kr 581
Normalpris
kr 441
Medlemspris
SPAR
kr 156
Erik Van der Plujm, Lisa Kay Solomon, Maarten Van Lieshout, Justin Lokitz, Patrick van der Pijl, Erik van der Pluijm, P Van Der Pijl Design a Better Business
BOG (PAPERBACK)
Design a Better Business
Erik Van der Plujm, Lisa Kay Solomon, Maarten Van Lieshout, Justin Lokitz, Patrick van der Pijl, Erik van der Pluijm, P Van Der Pijl
Eksklusiv medlemspris kr 223
kr 297
Normalpris
kr 230
Medlemspris
SPAR
kr 74
Denis Antoine Fashion Design
BOG (PAPERBACK)
Fashion Design
Denis Antoine
Eksklusiv medlemspris kr 279
kr 394
Normalpris
kr 291
Medlemspris
SPAR
kr 115
DK Woodwork Step by Step
BOG (HARDBACK)
Woodwork Step by Step
DK
Eksklusiv medlemspris kr 146
kr 164
Normalpris
kr 148
Medlemspris
SPAR
kr 18
Fundamentals of Industrial Electronics
BOG (PAPERBACK)
Fundamentals of Industrial Electronics
Eksklusiv medlemspris kr 534
kr 619
Normalpris
kr 543
Medlemspris
SPAR
kr 85
Roark T. Congdon Architectural Model Building
BOG (PAPERBACK)
Architectural Model Building
Roark T. Congdon
Eksklusiv medlemspris kr 371
kr 441
Normalpris
kr 378
Medlemspris
SPAR
kr 70
Annette Fischer, Anette Fischer Sewing for Fashion Designers
BOG (HARDBACK)
Sewing for Fashion Designers
Annette Fischer, Anette Fischer
Eksklusiv medlemspris kr 348
kr 506
Normalpris
kr 364
Medlemspris
SPAR
kr 158
Vi anbefaler også
J. Paulo Davim, Kaushik Kumar, Divya Zindani, Hridayjit Kalita Materials and Manufacturing Processes
BOG (PAPERBACK)
Materials and Manufacturing Processes
J. Paulo Davim, Kaushik Kumar, Divya Zindani, Hridayjit Kalita
Eksklusiv medlemspris kr 759
kr 1.014
Normalpris
kr 785
Medlemspris
SPAR
kr 255
T F Waters Fundamentals of Manufacturing For Engineers
BOG (PAPERBACK)
Fundamentals of Manufacturing For Engineers
T F Waters
Eksklusiv medlemspris kr 726
kr 867
Normalpris
kr 740
Medlemspris
SPAR
kr 141
Advances in Manufacturing II
BOG (PAPERBACK)
Advances in Manufacturing II
Eksklusiv medlemspris kr 759
kr 1.014
Normalpris
kr 785
Medlemspris
SPAR
kr 255
Alessandro Freddi, Mario Salmon Design Principles and Methodologies
BOG (PAPERBACK)
Design Principles and Methodologies
Alessandro Freddi, Mario Salmon
Eksklusiv medlemspris kr 838
kr 1.126
Normalpris
kr 867
Medlemspris
SPAR
kr 288
Advances in Manufacturing II
BOG (PAPERBACK)
Advances in Manufacturing II
Eksklusiv medlemspris kr 759
kr 1.014
Normalpris
kr 785
Medlemspris
SPAR
kr 255
Product Design and Factory Development
BOG (PAPERBACK)
Product Design and Factory Development
Eksklusiv medlemspris kr 595
kr 698
Normalpris
kr 605
Medlemspris
SPAR
kr 103
Torbjorn Netland, Michel Baudin, Michel (MMTI Baudin, Torbjørn Netland, Torbjørn Netland Introduction to Manufacturing
BOG (PAPERBACK)
Introduction to Manufacturing
Torbjorn Netland, Michel Baudin, Michel (MMTI Baudin, Torbjørn Netland, Torbjørn Netland
Eksklusiv medlemspris kr 592
kr 698
Normalpris
kr 603
Medlemspris
SPAR
kr 106
Artificial Intelligence and Machine Learning
BOG (HARDBACK)
Artificial Intelligence and Machine Learning
Eksklusiv medlemspris kr 858
kr 1.036
Normalpris
kr 876
Medlemspris
SPAR
kr 178
Mel Schwartz Innovations in Materials Manufacturing, Fabrication, and Environmental Safety
BOG (PAPERBACK)
Innovations in Materials Manufacturing, Fabrication, and Environmental Safety
Mel Schwartz
Eksklusiv medlemspris kr 575
kr 675
Normalpris
kr 585
Medlemspris
SPAR
kr 100
Membrane Processes
BOG (PAPERBACK)
Membrane Processes
Eksklusiv medlemspris kr 565
kr 662
Normalpris
kr 575
Medlemspris
SPAR
kr 97
Yohannes Yebabe Tesfay Developing Structured Procedural and Methodological Engineering Designs
BOG (PAPERBACK)
Developing Structured Procedural and Methodological Engineering Designs
Yohannes Yebabe Tesfay
Eksklusiv medlemspris kr 682
kr 901
Normalpris
kr 704
Medlemspris
SPAR
kr 219
Key Technologies in Polymer Chemistry
BOG (PAPERBACK)
Key Technologies in Polymer Chemistry
Eksklusiv medlemspris kr 776
kr 935
Normalpris
kr 792
Medlemspris
SPAR
kr 159
Fritz Klocke Modeling and Planning of Manufacturing Processes
BOG (PAPERBACK)
Modeling and Planning of Manufacturing Processes
Fritz Klocke
Eksklusiv medlemspris kr 759
kr 1.014
Normalpris
kr 785
Medlemspris
SPAR
kr 255
Polymer Products and Chemical Processes
BOG (PAPERBACK)
Polymer Products and Chemical Processes
Eksklusiv medlemspris kr 779
kr 935
Normalpris
kr 795
Medlemspris
SPAR
kr 156
Jagadeesha T Non-Traditional Machining Processes
BOG (PAPERBACK)
Non-Traditional Machining Processes
Jagadeesha T
Eksklusiv medlemspris kr 212
kr 220
Normalpris
kr 213
Medlemspris
SPAR
kr 8
Christopher A. Mattson, Carl D. Sorensen Product Development
BOG (PAPERBACK)
Product Development
Christopher A. Mattson, Carl D. Sorensen
Eksklusiv medlemspris kr 446
kr 563
Normalpris
kr 458
Medlemspris
SPAR
kr 117
M. Adithan Machine Methods
BOG (HARDBACK)
Machine Methods
M. Adithan
Eksklusiv medlemspris kr 464
kr 478
Normalpris
kr 465
Medlemspris
SPAR
kr 14
Yuchen Wang, Ang Liu, Xingzhi Wang Data-Driven Engineering Design
BOG (PAPERBACK)
Data-Driven Engineering Design
Yuchen Wang, Ang Liu, Xingzhi Wang
Eksklusiv medlemspris kr 485
kr 619
Normalpris
kr 498
Medlemspris
SPAR
kr 134
Cecil L. Smith Basic Process Measurements
BOG (HARDBACK)
Basic Process Measurements
Cecil L. Smith
Eksklusiv medlemspris kr 884
kr 1.115
Normalpris
kr 907
Medlemspris
SPAR
kr 231
Charles Thomas Introduction to Process Technology
BOG (PAPERBACK)
Introduction to Process Technology
Charles Thomas
Eksklusiv medlemspris kr 724
kr 816
Normalpris
kr 733
Medlemspris
SPAR
kr 92